Canon LBP352 - Disabling Remote UI

Disabling Remote UI
0X7U-049
The Remote UI is useful because the machine settings can be specied by using a Web browser on a computer. To use
the Remote UI, the machine must be connected to a computer over the network. If the machine is connected to a
computer via USB, or if you do not need to use the Remote UI, you might want to disable the Remote UI to reduce the
risk of having your machine controlled remotely over the network by malicious third parties.
1
Press ( ).
2
Use / to select <Network>, and press .
● When a message appears, press .
3
Select <Remote UI Settings> <Remote UI>.
4
Select <Off>, and press .
<Off>
Disables the Remote UI.
<On>
Enables the Remote UI.
5
Perform a hard reset. Performing a Hard Reset(P. 451)
➠ The settings are enabled after the hard reset is performed.
LINKS
Using Remote UI(P. 332)
Disabling HTTP Communication(P. 288)
Security
289