Canon LBP352 - Initializing Menu

Initializing Menu
0X7U-076
You can restore the settings of the machine ( Setup Menu(P. 360) ) to the factory default settings.
Do not press the power switch when the initialization is in progress
● If the machine is turned OFF during the initialization, it may be damaged.
If a Remote UI Access PIN has been specied
● The Remote UI Access PIN is also initialized. After performing initialization, respecify a Remote UI Access
PIN. Setting a Remote UI PIN(P. 263)
● When you want to initialize the network settings, follow the procedure in Initializing the Network
Settings(P. 552) .
● When you want to initialize the settings in <Adj. Print Position>, follow the procedure in
Adj. Print
Position(P. 406) .
( ) <Initialize Menu> <Yes> Perform a hard reset ( Performing a
Hard Reset(P. 451) )
Maintenance
551