Canon LBP352 - Select Feeder Menu

Select Feeder Menu
0X7U-064
The settings about the paper source and the size of paper loaded in the machine
are listed with short descriptions. When you press ( ) on the operation panel,
the Select Feeder menu is displayed. Default settings are marked with a dagger ( ).
Common settings
● The settings are the same as those for <Paper Source> in the Setup Menu(P. 360) . The settings specied
here are also applied to the <Paper Source> settings.
Asterisks (*)
● Settings marked with an asterisk (
*
) are not displayed depending on other settings or whether an optional
paper feeder, paper deck, or envelope feeder is installed in the machine.
Paper Source(P. 453)
Env. Tray Paper Size(P. 454)
MP Tray Paper Size(P. 454)
Drawer N Paper Size (N=1, 2, 3, 4, 5)(P. 454)
Standard Paper Size(P. 455)
MP Tray Priority(P. 456)
MP Tray for Mix Ppr.(P. 456)
Auto Select Drawer(P. 456)
Default Paper Type(P. 457)
Env. Tray Paper Type(P. 458)
MP Tray Paper Type(P. 458)
Drawer N Paper Type (N=1, 2, 3, 4, 5)(P. 458)
Manual 2-Sided (MP)(P. 458)
2-Sided Printing(P. 459)
Select Drawer1 Model(P. 459)
Paper Source
Select the paper source from which paper is fed. When you want to automatically change the paper source based on
the paper size and paper type, select <Auto>.
Auto
Envelope Tray
*
Multi-Purpose Tray
Drawer 1
Drawer 2
*
Drawer 3
*
Drawer 4
*
Drawer 5
*
( ) <Paper Source> Select the paper source
Setting Menu List
453