Canon LBP352 - Manual Feed; Paper Size; Paper Type

[Copies]
Specify the number of copies.
[Paper Size]
Specify the size of the paper to print on.
● When you want to print a PDF le or XPS le, specify [Auto] to automatically select the optimum paper size.
If no optimum size is found, the paper size set in <Standard Paper Size> is selected ( Standard Paper
Size(P. 455) ).
[Paper Type]
Specify the type of the paper to print on.
[Manual Feed]
If you select the check box, a document is printed only on the paper loaded in the multi-purpose tray.
[Enlarge/Reduce to Fit Paper Size]
If you select the check box, printouts are enlarged or reduced printouts according to the Printable
Area(P. 572) of the paper. The printouts are enlarged or reduced with the original aspect ratio kept.
● If [Paper Size] is set to [Auto], this item is unavailable.
[Image Orientation]
Specify the print orientation of an image.
[Auto]
Automatically determines the print orientation based on the width and height of the
image.
[Vertical] Select when printing a vertically-long image.
[Horizontal] Select when printing a horizontally-long image.
● If the specied setting of [Vertical] or [Horizontal] does not match the orientation of the image, the
reduced image is printed.
[Print Position]
Specify the position to print the image.
[Auto]
If the TIFF data contains the information that species the print position, the image is
printed according to the information, otherwise, it is printed at the center of paper.
JPEG data is always printed at the center of paper.
[Center] Images are printed at the center of paper.
[Top Left] Images are printed at the top left.
Printing a Document
153