● You cannot use spaces.
● A workgroup name set in [Workgroup Name] under [SMB Settings] is automatically used for [SMB
Workgroup Name], if any. A change to the workgroup name in [SMB Workgroup Name] is also applied to
[Workgroup Name] under [SMB Settings].
6
Perform a hard reset.
● Click [Device Control], select [Hard Reset], and then click [Execute].
➠
The settings are enabled after the hard reset is performed.
Selecting settings from the operation panel
● You can also enable or disable the WINS settings from the setting menu of the operation panel.
WINS
Resolution(P. 379)
LINKS
Conguring SMB(P. 242)
Network
228
To Next Page
Loading...
