Canon LBP352 - Page 412

( ) <Interface> <Timeout> <Timeout> <Off> or <On>
Timeout Time
*
Set the time period until a timeout error occurs.
5 to 15 to 300 (seconds)
( ) <Interface> <Timeout> <Timeout Time> Use the numeric
keys to set the time period
Connection Recog.
A problem such as improper overlay printing or garbled characters may occur during printing via wired LAN
connection. In this case, set <Connection Recog.> to <Off>.
Off
On
( ) <Interface> <Connection Recog.> Check the
message <Off> or <On> Perform a hard reset ( Performing a Hard
Reset(P. 451) )
Extended RX Buffer
Select whether to increase the space of the memory built in the machine for receiving print data from a computer. If
you select <On>, the time until the computer will be freed from print data processing or transmission can be reduced
when the computer sends a large volume of data or complicatedly structured data.
Off
On
( ) <Interface> <Extended RX Buffer> Check the
message <Off> or <On> Perform a hard reset ( Performing a Hard
Reset(P. 451) )
Setting Menu List
405