Canon LBP352 - Page 414

Offset Y (2-Sided)/Offset X (2-Sided)
*
You can adjust the vertical/horizontal print position for printing on the rst page (front side) in 2-sided printing
mode. The print position on the second page (back side) follows the settings for the paper source available
when the printing is started.
-5.0 to 0.0 to +5.0 (mm)
Recovery Printing
Select whether to print again the page of which printing was interrupted by a paper jam or an error.
Off
On
( ) <User Maintenance> <Recovery Printing> <Off> or <On>
Initialize Counter
Select whether to initialize the count of printed pages on the xing unit.
Fixing Unit
Initialize the count of pages using the same xing unit. You need to perform this operation each time you
replace the xing unit.
( ) <User Maintenance> <Initialize Counter> <Fixing
Unit> <Yes>
Check Paper Size
Select whether to check the size of paper that is fed from the paper source with the paper size set to <Free Size>. If you
select <On>, the message for conrming the paper size is displayed and the printing is stopped when the size of the
paper fed from the paper source does not match the print data.
Off
On
( ) <User Maintenance> <Check Paper Size> <Off> or <On>
Setting Menu List
407