Canon LBP352 - Printing Problems

PDF print range error.
An invalid range of pages has been specied for printing.
● Specify the correct range of print pages, and print the le again.
Printing from USB Memory (USB Direct Print)(P. 120)
Print Settings for Direct Print(P. 150)
Prepare maintenance kit.
The xing unit, feeder rollers, or the like have reached the end of their lifetime.
● Replacing the xing unit, feeder rollers, or the like with those included in a new maintenance kit is
recommended.
Consumable Parts(P. 574)
● You can continue printing when this message is displayed, but the print quality may deteriorate.
Print data version error.
Printing has been tried from the printer driver that is not available for the machine.
● Print again by using the printer driver available for this machine.
Set below paper.
Paper of the size specied to print is not loaded or the selected paper source does not match the paper
size.
● Load the paper of the size specied to print in the selected paper source.
Loading Paper(P. 37)
● Select the paper source loaded with the paper of the size specied to print.
Paper Source(P. 453)
● To forcibly print on the loaded paper, press ( ). For the multi-purpose tray, the setting
specied for <MP Tray Paper Size> is automatically changed to the paper size of the print data.
Starting up... 80 Initializing MEAP. Do not turn power OFF.
You have tried to shut down the machine while MEAP was being initialized.
● When the MEAP initialization is complete, this message is automatically removed. Wait until the message
is removed.
Starting up... 80 Preparing MEAP... Do not turn power OFF.
You have tried to shut down the machine while MEAP was preparing for operation.
● When MEAP is ready for operation, this message is automatically removed. Wait until the message is
removed.
Troubleshooting
494