4
Insert the envelopes into the envelope feeder until they stop.
● Insert the envelopes with the print side face up.
● Fan the envelope stack well, and tap it on a at surface to align the edges.
Do not exceed the load limit line when loading envelopes
● Make sure that the envelope stack does not exceed the load limit line ( ). Loading too much envelopes
can cause paper jams.
● When loading envelopes, see Loading Envelopes(P. 53) .
5
Align the paper guides against the edges of the envelopes.
● Press the lock release lever and slide the paper guides inward until they are aligned securely against the
edges of the envelopes.
Basic Operations
51
To Next Page
Loading...
