Cisco D9854 User Manual

4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide 4-61
Setup Menu: CI, Continued
ON_ID
Description: Specify the Transport Original Network ID.
Parameters: 0 to 65535.
Top/Bottom Slot
CAM Status Overview
Description: View the status of the CAM that is located in the top or bottom slot.
Parameters: Top slot or Bottom slot.
Status
Description: Displays the status of the CAM.
Parameters: Ready or Not Ready.
System Name
Description: Indicates the system name of the CAM.
Application Manufacture ID
Description: Displays the factory loaded application number of the CAM.
Manufacture Code
Description: Indicates the manufacture’s code.
Supported CA System IDs
Description: Displays the CA system identification name of the CAM. Some
CAMs may support multiple CA system IDs.
Serial Number
Description: Indicates the unique serial number of the CAM.
Hardware Version
Description: Displays the hardware version number of the CAM.
Application Version
Description: Displays the software version number of the CAM.
Company Name
Description: Displays the company name of the CAM.
Product Name
Description: Displays the product name of the CAM.

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C