4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide 4-77
Setup Menu: Outputs: TS Out: DPM, Continued
Unref
Description: This selects the DPM action to use for unreferenced content.
Unreferenced content is the remainder of the transport that is not
filtered by the program entries.
Parameters: Drop All or Pass All. Default is Drop All.
PSI Options
Description: This option allows the operator to specify which PSI tables to
include in the program/output stream.
Parameters: Pass All, Drop All or Control by Table.
Output Unref
ASI Pass, Drop
MOIP1 Pass, Drop
PSI Options Description
Pass All Transmits the incoming PSI Tables as is;
does not modify the content and rate.
Drop All Does not transmit any PSI Tables.
Ctl By Table The operator can enter the Tables menu to
select the output mode for each table. The
default table selections will be all pass, and
only with CDT dropped.
To Next Page
Loading...
