Cisco D9854 User Manual

4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide 4-99
Diagnostics Menu, Continued
ALARMS/WARNINGS
AW HISTORY
View History
Description: Select this option to view the system event messages. Press SELECT
to view the messages using the UP/DOWN arrow keys.
Clear History
Description: Select this option to clear any existing history information.
LOGS
View Logs
Description: Select this option to view the system log messages. Press SELECT to
view the messages using the UP/DOWN arrow keys.
Clear Logs
Description: Select this option to clear any existing log history information.
PSI
Frequency Plan
This is the Frequency Plan sub-menu. You cannot make any changes here, but you
can view the available frequency plans stored in the receiver. The following is a list
of the expanded abbreviations:
TxID - Transport ID
Freq (GHz) - Downlink Frequency (GHz)
FEC - Forward Error Correction inner code rate
Pol - Polarity of the received signal (H, V, or Off)
ONID - Original Network ID
SymRate - Symbol Rate (Msym/s)
Modulation - Modulator constellation setting
OrbPos - Orbital Position (in degrees)

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C