4-100 Model D9854 Advanced Program Receiver Installation and Operation Guide 4021470 Rev D
Diagnostics Menu, Continued
CHANNELS
Channels
This is the Virtual Channel sub-menu. You cannot make any changes here, but you
can view the available channels and their settings. The following is a list of the
expanded abbreviations:
VC - Virtual Channel
TxID - Transport ID
PMT - Program Map Table
ECM - Entitlement Control Message
Program Name - Name of the program
TABLES
PSI Tables
This is the Tables received sub-menu. You cannot make any changes here, but you
can view the PSI tables received and their settings. The following is a list of the
expanded abbreviations:
Type - Table Type (i.e., NIT, PMT, etc.)
Tbl-ID - Unique Table ID
ID - MPEG/DVB Table ID
Ver - Table Version number
PID - Program PID number
Status - Reception status
Sections - PSI tables are received in sections. This indicates the section number
received. This information is useful for diagnostics/troubleshooting purposes.
POWER ON
Creation Date and Time
Description: Displays the date and time when the receiver was manufactured.
Power On Date and Time
Description: Displays the date and time when the receiver was powered up.
Total Hrs, Hrs Since Last Pwoff
Description: Displays the total numbers of hours (Total Hrs) that the receiver has
been operating, and the number of hours since the last power-off
(Hrs Since Last Pwoff).
To Next Page
Loading...
Need help?
General
