Cisco D9854 User Manual

4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide 5-15
Viewing the Input Status, Continued
The following table indicates the current signal lock status for the selected RF input:
Status Description
Locked Indicates the receiver is locked to a carrier with no
valid content.
Lock+Sig Indicates the receiver is locked to a carrier with
valid content.
No Lock Indicates the receiver is not locked to a carrier.

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C