Cisco D9854 - Page 252

6-4 Model D9854 Advanced Program Receiver Installation and Operation Guide 4021470 Rev D
PE n: ISE Not
Auth
Set Channel is not
authorized
Cause: The channel is
unauthorized for the
current program.
Remedy: Contact
your (uplink) service
provider to
determine whether
you are authorized to
receive the current
program.
Program
unauthorized
because the tier
bits do not
match.
Minor
Channel requires an
authorization key
Program is
unauthorized
because the unit
does not have an
authorization
key.
Channel is blacked
out
Program is
unauthorized
because at a
minimum, it
needs to match
one blackout
code.
Channel uses an
unknown CA system
Cause: Conditional
access not supported.
Remedy: Contact
your (uplink) service
provider to
determine whether
you are authorized to
receive the current
program at this time.
Non-SA
conditional
access system.
Channel
authorization refused
There is
mismatch in the
Conditional
access.
Channel requires an
IRD with CA support
Conditional
access is not
supported.
Channel requires the
PE to have an ISE
Cause: Hardware
issue.
Remedy: Clear
alarms, reset unit,
and notify customer
service if problem
persists.
Hardware fault.
Alarm Message
Type
Message Cause/Remedy Description Severity