4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide 6-5
Clear Fault Reset
Channel is
authorized
CI Top Slot
Status
Set Initialization Fail Cause: CAM is
damaged or not fully
inserted, hardware
issue, CAM software
crash or you don’t
have subscription
rights for the card.
Remedy: Re-insert
the CAM.
Initialization of
CAM in top slot
failed.
Major
No Descrambling All elementary
streams of all
selected
programs are not
descrambled.
Clear CAM Operation OK
CI Bottom Slot
Status
Set Initialization Fail Cause: CAM is
damaged or not fully
inserted, hardware
issue, CAM software
crash or you don’t
have subscription
rights for the smart
card.
Remedy: Re-insert
the CAM, and/or
check your rights for
the smart card.
Initialization of
CAM in top slot
failed.
Major
No Descrambling All elementary
streams of all
selected
programs are not
descrambled.
Clear CAM Operation OK
PE n CI Status Set Program Not
Descrambled
Cause: Hardware
issue, CAM software
crash or you don’t
have subscription
rights for the smart
card.
Remedy: Reinsert the
CAM and/or check
your rights for the
smart card.
All elementary
streams for this
service selected
for descrambling
were not
descrambled by
the CAM.
Major
1 or more ES Not
Descrambled
At least 1
elementary
stream is not
descrambled,
but the CAM is
still
descrambling
other elementary
streams for this
service.
Clear Descrambling OK
Alarm Message
Type
Message Cause/Remedy Description Severity
To Next Page
Loading...
Need help?
General
