Cisco D9854 User Manual

4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide 6-7
User requested
factory reset
Factory reset
requires reboot.
User requested
reboot
User reboot
request.
PRODUCTION -
Protect Flash
Reboot after
production
tables removed.
osal_SetDataForAllTa
sks
Cause: Possible
software issue.
Remedy: Clear
alarms, reset unit,
notify customer
service if problem
persists.
Application
initialization
error.
aw_LoadFaultList
osal_Init
NVS FLASH
mounted
DB_Table_Cl::popula
teNvsRecords
STAPI_Init
dprm startup
dprm clear startup
DB_Array32_Cl init
failed
DB_FlagArray32_Cl
init failed
Wrong DB Item
detected: item =
AAA, table = BBB
DB_Item_Cl::addItem
() failed
Memory allocation
error on DB table
construction
DB_Table_Cl::addTa
ble() failed
DB_Table_Cl::addIte
m() failed: too many
DB Items
DBT Init Failed: AAA
Alarm Message
Type
Message Cause/Remedy Description Severity

Cisco D9854 Specifications

General

Model	D9854
Category	Receiver
Output	ASI, IP
Decoding	MPEG-2
Conditional Access	BISS
Receiver Type	Professional IRD
解密	DVB-CSA, BISS, AES
Input Frequency Range	950 MHz to 2150 MHz
Modulation Formats	QPSK, 8PSK
Symbol Rate	1 to 45 Msps
Power Supply	100-240 VAC, 50/60 Hz
Power Consumption	40W (typical)
Operating Temperature	0°C