4021470 Rev D D9854 Advanced Program Receiver Installation and Operation Guide 4-23
Status Menu: TS Input, Continued
PROGRAM STATUS
PE
Description: Indicates the Program Entry number.
Parameters: PE1 to PE16.
SR Status
Description: This displays the status of an alternate authorized program/service
from the same transport stream when the receiver is not authorized
to view the primary program.This is an uplink initiated function
that maps the alternate service to the original (primary) service
PIDs, replacing the original service with the alternate service at the
digital transport output. No local intervention is required by the
receiver operator for provision of this service replacement feature.
Parameters: Not Started - Indicates that an event has not started.
Primary - Indicates that a service replacement event is active, but
the primary program is being displayed.
Alternate - Indicates that a service replacement event is active, and
that the receiver has tuned to and is displaying the alternate
program/event as it is not authorized to view the scheduled event.
SR Event Type
Description: Indicates the type of service replacement event.
Parameters: None - Indicates that no service replacement event is scheduled.
Scheduled - Indicates that all receivers will tune to the alternate
program at the scheduled time. This setting is only applicable to
current PE1 (i.e., PowerVu) programs; not PE2 through PE16.
CA - Indicates that only receivers unauthorized to view the
scheduled program will tune to the alternate program according to
the selected authorization tier bits. This setting is only applicable to
current PE1 (i.e., PowerVu) programs; not PE2 through PE16.
Cue Trigger - Indicates that only receivers authorized by the Cue
Trigger mask will tune to the scheduled program/event. Cue
triggers can only be initiated /controlled on PE1 (i.e., PowerVu).
To Next Page
Loading...
Need help?
General
