Cisco IE-3000-8TC Command Reference

2-306
Cisco IE 3000 Switch Command Reference
OL-13019-01
Chapter 2 IE 3000 Switch Cisco IOS Commands
show alarm description port
show alarm description port
Use the show alarm description port user EXEC command to display the alarm numbers with the text
description.
show alarm description port [ | {begin | exclude | include} expression]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show alarm description port command. It shows the alarmIDs
and their respective alarm descriptions.
Switch> show alarm description port
1 Link Fault
2 Port Not Forwarding
3 Port Not Operating
4 FCS Error Rate exceeds threshold
Related Commands
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(44)EX This command was introduced.
Command Description
alarm profile (global
configuration)
Creates an alarm profile containing one or more alarm IDs and alarm options.
show alarm profile Displays all alarm profiles or a specified alarm profile and lists the interfaces
to which each profile is attached.

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes