Cisco IE-3000-8TC Command Reference

2-463
Cisco IE 3000 Switch Command Reference
OL-13019-01
Chapter 2 IE 3000 Switch Cisco IOS Commands
show setup express
show setup express
Use the show setup express privileged EXEC command to display if Express Setup mode is active on
the switch.
show setup express [ | {begin | exclude | include} expression]
Syntax Description
Defaults No default is defined.
Command Modes Privileged EXEC
Command History
Examples This is an example of output from the show setup express command:
Switch# show setup express
express setup mode is active
Related Commands
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(44)EX This command was introduced.
Command Description
setup express Enables Express Setup mode.

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes