A-10
Cisco IE 3000 Switch Command Reference
OL-13019-01
Appendix A IE 3000 Switch Bootloader Commands
format
format
Use the format bootloader command to format the specified file system and destroy all data in that file
system.
format filesystem:
Syntax Description
Command Modes Bootloader
Command History
Usage Guidelines
Caution Use this command with care; it destroys all data on the file system and renders your system unusable.
filesystem: Alias for a flash file system. Use flash: for the system board flash device.
Release Modification
12.2(44)EX This command was introduced.
To Next Page
Loading...
