Cisco IE-3000-8TC Command Reference

2-587
Cisco IE 3000 Switch Command Reference
OL-13019-01
Chapter 2 IE 3000 Switch Cisco IOS Commands
test relay
test relay
Use the test relay privileged EXEC command to turn on or off the relay circuitry.
test relay {major | minor} {on| off}
Caution Using the test command alters the state (on or off) of a relay. Previous states are not saved.
Syntax Description
Command Modes\ Privileged EXEC
Command History
Usage Guidelines You can use the test relay privileged EXEC command to verify relay circuitry connections to the alert
devices. You can test alarm scanners without having to create an alarm condition.
Examples This example shows how to turn on the major relay circuitry:
Switch# test relay major on
Related Commands
major Select the major relay circuitry.
minor Select the minor relay circuitry.
on Turn on the selected relay circuitry.
off Turn off the selected relay circularity.
Release Modification
12.2(44)EX This command was introduced.
Command Description
show alarm profile Displays all alarm profiles or a specified alarm profile and lists the
interfaces to which each profile is attached.
show alarm settings Displays environmental alarm settings and options.
show facility-alarm relay Displays alarm relays generated on the switch.

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes