2-320
Cisco IE 3000 Switch Command Reference
OL-13019-01
Chapter 2 IE 3000 Switch Cisco IOS Commands
show cip
show cip
Use the show cip privileged EXEC command to display information about the Common Industrial
Protocol (CIP) subsystem.
show cip {connection | file | miscellaneous | object | security | session | status}
[| {begin | exclude | include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show cip security command:
Switch# show cip security
State : Enabled
Password: abc123
Window: Open
Owner IP: 172.20.140.147
Window timeout: 600 seconds
Window open tick: 17
Related Commands
connection Display the CIP connection information.
file Display the information about the CIP file instances.
miscellaneous Display miscellaneous CIP system information.
object Display information about specific CIP objects. These objects include assembly,
Ethernet link, identity, switch parameter, time sync, and TCP/IP objects.
security Display the CIP security window status and settings.
session Display the active and inactive CIP sessions.
status Display the CIP status (enabled or disabled).
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(44)EX This command was introduced.
Command Description
cip Enables the CIP and sets the CIP security options on the switch.