Cisco IE-3000-8TC Command Reference

A-13
Cisco IE 3000 Switch Command Reference
OL-13019-01
Appendix A IE 3000 Switch Bootloader Commands
memory
memory
Use the memory bootloader command to display memory heap utilization information.
memory
Syntax Description This command has no arguments or keywords.
Command Modes Bootloader
Command History
Examples This example shows how to display memory heap utilization information:
switch: memory
Text: 0x00700000 - 0x0071cf24 (0x0001cf24 bytes)
Rotext: 0x00000000 - 0x00000000 (0x00000000 bytes)
Data: 0x0071cf24 - 0x00723a0c (0x00006ae8 bytes)
Bss: 0x0072529c - 0x00746f94 (0x00021cf8 bytes)
Heap: 0x00756f98 - 0x00800000 (0x000a9068 bytes)
Bottom heap utilization is 22 percent.
Top heap utilization is 0 percent.
Total heap utilization is 22 percent.
Total bytes: 0xa9068 (692328)
Bytes used: 0x26888 (157832)
Bytes available: 0x827e0 (534496)
Alternate heap utilization is 0 percent.
Total alternate heap bytes: 0x6fd000 (7327744)
Alternate heap bytes used: 0x0 (0)
Alternate heap bytes available: 0x6fd000 (7327744)
Table A-2 describes the fields in the display.
Release Modification
12.2(44)EX This command was introduced.
Ta b l e A-2 memory Field Descriptions
Field Description
Text Beginning and ending address of the text storage area.
Rotext Beginning and ending address of the read-only text storage area. This part of the data
segment is grouped with the Text entry.
Data Beginning and ending address of the data segment storage area.
Bss Beginning and ending address of the block started by symbol (Bss) storage area. It
is initialized to zero.
Heap Beginning and ending address of the area in memory that memory is dynamically
allocated to and freed from.

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes