Cisco IE-3000-8TC Command Reference

A-9
Cisco IE 3000 Switch Command Reference
OL-13019-01
Appendix A IE 3000 Switch Bootloader Commands
flash_init
flash_init
Use the flash_init bootloader command to initialize the flash file system.
flash_init
Syntax Description This command has no arguments or keywords.
Defaults The flash file system is automatically initialized during normal system operation.
Command Modes Bootloader
Command History
Usage Guidelines During the normal bootup process, the flash file system is automatically initialized.
Use this command to manually initialize the flash file system. For example, you use this command
during the recovery procedure for a lost or forgotten password.
Release Modification
12.2(44)EX This command was introduced.

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes