Cisco IE-3000-8TC - Debug Cip

B-5
Cisco IE 3000 Switch Command Reference
OL-13019-01
Appendix B IE 3000 Switch Debug Commands
debug cip
debug cip
Use the debug cip privileged EXEC command to enable debugging of the Common Industrial Protocol
(CIP) subsystem. Use the no form of this command to disable debugging.
debug cip {assembly | connection manager | errors | event | file | io | packet | request response |
security | session | socket}
no debug cip {assembly | connection manager | errors | event | file | io | packet | request response
| security | session | socket}
Syntax Description
Defaults CIP debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug cip command is the same as the no debug cip command.
Related Commands
assembly Display CIP assembly debug messages.
connection
manager
Display CIP connection manager debug messages.
errors Display CIP error debug messages.
event Display CIP event debug messages.
file Display CIP file debug messages.
io Display CIP input/output (I/O) debug messages.
packet Display CIP packet debug messages.
request response Display CIP request response debug messages.
security Display CIP security debug messages.
session Display CIP session debug messages.
socket Display CIP socket debug messages.
Release Modification
12.2(44)EX This command was introduced.
Command Description
show debugging Displays information about the types of debugging that are enabled.
show cip Displays information about the Common Industrial Protocol (CIP)
subsystem.