Cisco IE-3000-8TC Command Reference

2-402
Cisco IE 3000 Switch Command Reference
OL-13019-01
Chapter 2 IE 3000 Switch Cisco IOS Commands
show location
show location
Use the show location user EXEC command to display location information for an endpoint.
show location admin-tag | [ | {begin | exclude | include} expression]
show location civic-location {identifier id number | interface interface-id | static } | {begin |
exclude | include} expression]
show location elin-location {identifier id number | interface interface-id | static } | {begin |
exclude | include} expression]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines Use the show location command to display location information for an endpoint.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
admin-tag Display administrative tag or site information.
civic-location Display civic location information.
elin-location Display emergency location information (ELIN).
identifier id Specify the ID for the civic location or the elin location. The id range
is 1 to 4095.
interface interface-id (Optional) Display location information for the specified interface or
all interfaces. Valid interfaces include physical ports.
static Display static configuration information.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(44)EX This command was introduced.

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes