Cisco IE-3000-8TC - Show Flowcontrol

2-367
Cisco IE 3000 Switch Command Reference
OL-13019-01
Chapter 2 IE 3000 Switch Cisco IOS Commands
show flowcontrol
This is an example of output from the show flowcontrol interface interface-id command:
Switch> show flowcontrol gigabitethernet1/2
Port Send FlowControl Receive FlowControl RxPause TxPause
admin oper admin oper
--------- -------- -------- -------- -------- ------- -------
Gi1/2 desired off off off 0 0
Related Commands Command Description
flowcontrol Sets the receive flow-control state for an interface.