Cisco IE-3000-8TC Command Reference

C-29
Cisco IE 3000 Switch Command Reference
OL-13019-01
Appendix C IE 3000 Switch Show Platform Commands
show platform vlan
show platform vlan
Use the show platform vlan privileged EXEC command to display platform-dependent VLAN
information.
show platform vlan {misc | mvid | prune | refcount | rpc {receive | transmit}} [ | {begin | exclude
| include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
misc Display miscellaneous VLAN module information.
mvid Display the mapped VLAN ID (MVID) allocation information.
prune Display the platform-maintained pruning database.
refcount Display the VLAN lock module-wise reference counts.
rpc {receive |
transmit}
Display remote procedure call (RPC) messages. The keywords have these
meanings:
• receive—Display received information.
• transmit—Display sent information.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(44)EX This command was introduced.

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes