2-464
Cisco IE 3000 Switch Command Reference
OL-13019-01
Chapter 2 IE 3000 Switch Cisco IOS Commands
show spanning-tree
show spanning-tree
Use the show spanning-tree user EXEC command to display spanning-tree state information.
show spanning-tree [bridge-group | active [detail] | backbonefast | blockedports | bridge | detail
[active] | inconsistentports | interface interface-id | mst | pathcost method | root | summary
[totals] | uplinkfast | vlan vlan-id] [ | {begin | exclude | include} expression]
show spanning-tree bridge-group [active [detail] | blockedports | bridge | detail [active] |
inconsistentports | interface interface-id | root | summary] [ | {begin | exclude | include}
expression]
show spanning-tree vlan vlan-id [active [detail] | blockedports | bridge | detail [active] |
inconsistentports | interface interface-id | root | summary] [ | {begin | exclude | include}
expression]
show spanning-tree {vlan vlan-id | bridge-group} bridge [address | detail | forward-time |
hello-time | id | max-age | priority [system-id] | protocol] [ | {begin | exclude | include}
expression]
show spanning-tree {vlan vlan-id | bridge-group} root [address | cost | detail | forward-time |
hello-time | id | max-age | port | priority [system-id] [ | {begin | exclude | include}
expression]
show spanning-tree interface interface-id [active [detail] | cost | detail [active] | inconsistency |
portfast | priority | rootcost | state] [ | {begin | exclude | include} expression]
show spanning-tree mst [configuration [digest]] | [instance-id [detail | interface interface-id
[detail]] [ | {begin | exclude | include} expression]
Syntax Description bridge-group (Optional) Specify the bridge group number. The range is 1 to 255.
active [detail] (Optional) Display spanning-tree information only on active interfaces
(available only in privileged EXEC mode).
backbonefast (Optional) Display spanning-tree BackboneFast status.
blockedports (Optional) Display blocked port information (available only in privileged
EXEC mode).
bridge [address | detail |
forward-time | hello-time |
id | max-age | priority
[system-id] | protocol]
(Optional) Display status and configuration of this switch (optional
keywords available only in privileged EXEC mode).
detail [active] (Optional) Display a detailed summary of interface information (active
keyword available only in privileged EXEC mode).
inconsistentports (Optional) Display inconsistent port information (available only in
privileged EXEC mode).
interface interface-id
[active [detail] | cost |
detail [active] |
inconsistency | portfast |
priority | rootcost | state]
(Optional) Display spanning-tree information for the specified interface
(all options except portfast and state available only in privileged EXEC
mode). Enter each interface separated by a space. Ranges are not
supported. Valid interfaces include physical ports, VLANs, and port
channels. The VLAN range is 1 to 4094. The port-channel range is 1 to
6.
To Next Page
Loading...
