Cisco IE-3000-8TC - Page 341

2-315
Cisco IE 3000 Switch Command Reference
OL-13019-01
Chapter 2 IE 3000 Switch Cisco IOS Commands
show auto qos
This is an example of output from the show auto qos interface interface-id command when auto-QoS
is disabled on an interface:
Switch> show auto qos interface gigabitethernet1/1
AutoQoS is disabled
Related Commands Command Description
auto qos voip Automatically configures QoS for VoIP within a QoS domain.
debug auto qos Enables debugging of the auto-QoS feature.