Cisco IE-3000-8TC Command Reference

2-336
Cisco IE 3000 Switch Command Reference
OL-13019-01
Chapter 2 IE 3000 Switch Cisco IOS Commands
show controllers ethernet-controller
0 Learning Cam Skip Count
15 Sup Queue 0 Drop Frames 0 Sup Queue 8 Drop Frames
0 Sup Queue 1 Drop Frames 0 Sup Queue 9 Drop Frames
0 Sup Queue 2 Drop Frames 0 Sup Queue 10 Drop Frames
0 Sup Queue 3 Drop Frames 0 Sup Queue 11 Drop Frames
0 Sup Queue 4 Drop Frames 0 Sup Queue 12 Drop Frames
0 Sup Queue 5 Drop Frames 0 Sup Queue 13 Drop Frames
0 Sup Queue 6 Drop Frames 0 Sup Queue 14 Drop Frames
0 Sup Queue 7 Drop Frames 0 Sup Queue 15 Drop Frames
===========================================================================
Switch 1, PortASIC 1 Statistics
---------------------------------------------------------------------------
0 RxQ-0, wt-0 enqueue frames 0 RxQ-0, wt-0 drop frames
52 RxQ-0, wt-1 enqueue frames 0 RxQ-0, wt-1 drop frames
0 RxQ-0, wt-2 enqueue frames 0 RxQ-0, wt-2 drop frames
<output truncated>
Related Commands Command Description
show controllers
cpu-interface
Displays the state of the CPU network ASIC and send and receive statistics
for packets reaching the CPU.
show controllers tcam Displays the state of registers for all ternary content addressable memory
(TCAM) in the system and for TCAM interface ASICs that are CAM
controllers.

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes