Cisco IE-3000-8TC Command Reference

2-356
Cisco IE 3000 Switch Command Reference
OL-13019-01
Chapter 2 IE 3000 Switch Cisco IOS Commands
show errdisable recovery
Interfaces that will be enabled at the next timeout:
Interface Errdisable reason Time left(sec)
--------- ----------------- --------------
Gi1/2 link-flap 279
Note Though visible in the output, the unicast-flood field is not valid.
Related Commands Command Description
errdisable recovery Configures the recover mechanism variables.
show errdisable detect Displays error-disabled detection status.
show errdisable flap-values Displays error condition recognition information.
show interfaces status Displays interface status or a list of interfaces in error-disabled state.

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes