EasyManuals Logo

Cisco IE-3000-8TC Command Reference

Cisco IE-3000-8TC
802 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #523 background imageLoading...
Page #523 background image
2-497
Cisco IE 3000 Switch Command Reference
OL-13019-01
Chapter 2 IE 3000 Switch Cisco IOS Commands
snmp-server host
community-string Password-like community string sent with the notification operation. Though
you can set this string by using the snmp-server host command, we
recommend that you define this string by using the snmp-server community
global configuration command before using the snmp-server host
command.
Note The @ symbol is used for delimiting the context information. Avoid
using the @ symbol as part of the SNMP community string when
configuring this command.
notification-type (Optional) Type of notification to be sent to the host. If no type is specified,
all notifications are sent. The notification type can be one or more of the
these keywords:
bridge—Send SNMP Spanning Tree Protocol (STP) bridge MIB traps.
cluster—Send cluster member status traps.
config—Send SNMP configuration traps.
copy-config—Send SNMP copy configuration traps.
entity— Send SNMP entity traps.
envmon—Send environmental monitor traps.
errdisable—Send SNMP errdisable notifications.
flash—Send SNMP FLASH notifications.
hsrp—Send SNMP Hot Standby Router Protocol (HSRP) traps.
ipmulticast—Send SNMP IP multicast routing traps.
mac-notification—Send SNMP MAC notification traps.
msdp—Send SNMP Multicast Source Discovery Protocol (MSDP)
traps.
ospf—Send Open Shortest Path First (OSPF) traps.
pim—Send SNMP Protocol-Independent Multicast (PIM) traps.
port-securitySend SNMP port-security traps.
rtr—Send SNMP Response Time Reporter traps.
snmp—Send SNMP-type traps.
storm-control—Send SNMP storm-control traps.
stpx—Send SNMP STP extended MIB traps.
syslog—Send SNMP syslog traps.
tty—Send TCP connection traps.
udp-port portConfigure the User Datagram Protocol (UDP) port
number of the host to receive the traps. The range is from 0 to 65535.
vlan-membership— Send SNMP VLAN membership traps.
vlancreate—Send SNMP VLAN-created traps.
vlandelete—Send SNMP VLAN-deleted traps.
vtp—Send SNMP VLAN Trunking Protocol (VTP) traps.

Table of Contents

Other manuals for Cisco IE-3000-8TC

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco IE-3000-8TC and is the answer not in the manual?

Cisco IE-3000-8TC Specifications

General IconGeneral
Switching Capacity16 Gbps
MAC Address Table Size8000
Uplink Ports2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature-40°C to 70°C
MountingDIN rail
Ports8 x Ethernet 10/100Base-TX ports
Jumbo Frame SupportYes

Related product manuals