Cisco IE-3000-8TC Command Reference

2-562
Cisco IE 3000 Switch Command Reference
OL-13019-01
Chapter 2 IE 3000 Switch Cisco IOS Commands
switchport backup interface
You can verify your setting by entering the show interfaces switchport backup detail privileged EXEC
command.
Switch# show interfaces switchport backup detail
Switch Backup Interface Pairs:
Active Interface Backup Interface State
------------------------------------------------------------------------
GigabitEthernet1/1 GigabitEthernet1/2 Active Up/Backup Standby
Preemption Mode : off
Multicast Fast Convergence : On
Bandwidth : 1000000 Kbit (Gi1/1), 1000000 Kbit (Gi1/2)
Mac Address Move Update Vlan : auto
Related Commands Command Description
show interfaces [interface-id]
switchport backup
Displays the configured Flex Links and their status on the switch or
for the specified interface.

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes