Cisco IE-3000-8TC Command Reference

A-6
Cisco IE 3000 Switch Command Reference
OL-13019-01
Appendix A IE 3000 Switch Bootloader Commands
delete
delete
Use the delete bootloader command to delete one or more files from the specified file system.
delete filesystem:/file-url ...
Syntax Description
Command Modes Bootloader
Command History
Usage Guidelines Filenames and directory names are case sensitive.
The switch prompts you for confirmation before deleting each file.
Examples This example shows how to delete two files:
switch: delete flash:test2.text flash:test5.text
Are you sure you want to delete "flash:test2.text" (y/n)?y
File "flash:test2.text" deleted
Are you sure you want to delete "flash:test5.text" (y/n)?y
File "flash:test2.text" deleted
You can verify that the files were deleted by entering the dir flash: bootloader command.
Related Commands
filesystem: Alias for a flash file system. Use flash: for the system board flash device.
/file-url Path (directory) and filename to delete. Separate each filename with a space.
Release Modification
12.2(44)EX This command was introduced.
Command Description
copy Copies a file from a source to a destination.

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes