Cisco IE-3000-8TC - Page 712

B-34
Cisco IE 3000 Switch Command Reference
OL-13019-01
Appendix B IE 3000 Switch Debug Commands
debug platform ip igmp snooping
Note Though visible in the command-line help strings, the rpc l3mm keyword is not supported.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug platform ip igmp snooping command is the same as the no debug platform ip igmp
snooping command.
Related Commands
Release Modification
12.2(44)EX This command was introduced.
Command Description
debug ip igmp
snooping
Displays information about platform-independent IGMP snooping activity.
show debugging Displays information about the types of debugging that are enabled.