Cisco IE-3000-8TC - Page 789

Index
IN-5
Cisco IE 3000 Switch Command Reference
OL-13019-01
DTP flap
error detection for 2-109
error recovery timer 2-114
DTP negotiation 2-567
dual-purpose uplink ports
displaying the active media 2-375
selecting the type 2-211
duplex command 2-107
dynamic-access ports
configuring 2-557
restrictions 2-558
dynamic auto VLAN membership mode 2-565
dynamic desirable VLAN membership mode 2-565
Dynamic Host Configuration Protocol (DHCP)
See DHCP snooping
Dynamic Trunking Protocol
See DTP
E
EAP-request/identity frame
maximum number to send 2-97
response time before retransmitting 2-105
environmental alarms, displaying 2-309
environment variables, displaying 2-316
errdisable detect cause command 2-109
errdisable detect cause small-frame comand 2-111
errdisable recovery cause small-frame 2-113
errdisable recovery command 2-114
error conditions, displaying 2-353
error disable detection 2-109
error-disabled interfaces, displaying 2-368
EtherChannel
assigning Ethernet interface to channel group 2-33
creating port-channel logical interface 2-122
debug EtherChannel/PAgP, display B-11
debug platform-specific events, display B-30
displaying 2-357
interface information, displaying 2-368
EtherChannel (continued)
LACP
clearing channel-group information 2-47
debug messages, display B-17
displaying 2-398
modes 2-33
port priority for hot-standby ports 2-171
restricting a protocol 2-36
system priority 2-173
load-distribution methods 2-273
PAgP
aggregate-port learner 2-260
clearing channel-group information 2-50
debug messages, display B-24
displaying 2-451
error detection for 2-109
error recovery timer 2-114
learn method 2-260
modes 2-33
physical-port learner 2-260
priority of interface for transmitted traffic 2-262
Ethernet controller, internal register display 2-330
Ethernet statistics, collecting 2-289
exception crashinfo command 2-116
exit command 2-612
extended discovery of candidate switches 2-59
extended-range VLANs
and allowed VLAN list 2-579
and pruning-eligible list 2-579
configuring 2-600
extended system ID for STP 2-511
F
facility alarm relays, displaying 2-360
facility alarm status, displaying 2-361
fallback profile command 2-117
fallback profiles, displaying 2-362