Index
IN-11
Cisco IE 3000 Switch Command Reference
OL-13019-01
port-based authentication (continued)
manual control of authorization state 2-99
PAE as authenticator 2-98
periodic re-authentication
enabling 2-102
time between attempts 2-105
quiet period between failed authentication
exchanges
2-105
re-authenticating IEEE 802.1x-enabled ports 2-101
resetting configurable IEEE 802.1x parameters 2-88
switch-to-authentication server retransmission
time
2-105
switch-to-client frame-retransmission
number
2-96 to 2-97
switch-to-client retransmission time 2-105
test for IEEE 802.1x readiness 2-103
port-channel load-balance command 2-273
Port Fast, for spanning tree 2-538
port ranges, defining 2-70
ports, debugging B-54
ports, protected 2-578
port security
aging 2-574
debug messages, display B-56
enabling 2-569
violation error recovery 2-114
port trust states for QoS 2-247
port types, MVR 2-257
power supply alarms, setting 2-7
power-supply dual command 2-275
power-supply mode 2-275
primary temperature alarm 2-8
priority-queue command 2-276
privileged EXEC mode 1-2, 1-3
product identification information, displaying 2-379
protected ports, displaying 2-373
pruning
VLANs 2-579
VTP
displaying interface information 2-368
enabling 2-619, 2-623
pruning-eligible VLAN list 2-580
PVST+
See STP
Q
QoS
auto-QoS
configuring 2-22
debug messages, display B-2
displaying 2-312
class maps
creating 2-40
defining the match criteria 2-207
displaying 2-321
defining the CoS value for an incoming packet 2-217
displaying configuration information 2-312, 2-429
DSCP transparency 2-229
DSCP trusted ports
applying DSCP-to-DSCP-mutation map to 2-219
defining DSCP-to-DSCP-mutation map 2-221
egress queues
allocating buffers 2-225
defining the CoS output queue threshold
map
2-243
defining the DSCP output queue threshold
map
2-245
displaying buffer allocations 2-433
displaying CoS output queue threshold
map
2-437
displaying DSCP output queue threshold
map
2-437
displaying queueing strategy 2-433
displaying queue-set settings 2-440
To Next Page
Loading...
