Contents
x
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
OL-8978-04
Configurable VLAN Parameters 11-3
Default VLAN Configuration 11-3
Configuring VLANs on the Switch 11-4
Normal-Range VLAN Configuration Guidelines 11-5
Creating Normal-Range VLANs 11-5
Modifying Normal-Range VLANs 11-6
Configuring Extended-Range VLANs on the Switch 11-6
Extended-Range VLAN Configuration Guidelines 11-6
Creating Extended-Range VLANs 11-7
Mapping VLANs to VLANs 11-8
Mapping 802.1Q VLANs to ISL VLANs 11-9
Deleting 802.1Q-to-ISL VLAN Mappings 11-10
Allocating Internal VLANs 11-10
Assigning Switch Ports to a VLAN 11-10
Enabling or Disabling VLAN Port-Provisioning Verification 11-12
Deleting a VLAN 11-13
Configuring VLAN Mappings on a Per-Port or Per-ASIC Basis 11-14
Understanding VLAN Mapping 11-14
Configuration Guidelines and Restrictions 11-14
Enabling or Disabling VLAN Mapping on an Individual Port 11-17
Configuring VLAN Mapping on an Individual Port 11-17
Clearing the VLAN Mapping 11-18
Displaying the VLAN Mapping Information 11-19
Configuring Private VLANs on the Switch 11-19
Understanding How Private VLANs Work 11-20
Private VLAN Configuration Guidelines 11-21
Creating a Primary Private VLAN 11-25
Viewing the Port Capability of a Private VLAN Port 11-27
Deleting a Private VLAN 11-28
Deleting an Isolated, Community, or Two-Way Community VLAN 11-29
Deleting a Private VLAN Mapping 11-29
Private VLAN Support on the MSFC 11-30
Configuring FDDI VLANs on the Switch 11-30
Configuring Token Ring VLANs on the Switch 11-31
Understanding How Token Ring TrBRF VLANs Work 11-31
Understanding How Token Ring TrCRF VLANs Work 11-32
Token Ring VLAN Configuration Guidelines 11-34
Creating or Modifying a Token Ring TrBRF VLAN 11-34
To Next Page
Loading...
