Contents
xi
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
OL-8978-04
Creating or Modifying a Token Ring TrCRF VLAN 11-35
Configuring VLANs for the Firewall Services Module 11-37
CHAPTER
12 Configuring InterVLAN Routing 12-1
Understanding How InterVLAN Routing Works 12-1
Configuring InterVLAN Routing on the MSFC 12-2
MSFC Routing Configuration Guidelines 12-2
Configuring IP InterVLAN Routing on the MSFC 12-3
Configuring IPX InterVLAN Routing on the MSFC 12-3
Configuring AppleTalk InterVLAN Routing on the MSFC 12-4
Configuring MSFC Features 12-5
CHAPTER
13 Configuring CEF for PFC2 and PFC3A 13-1
Understanding How Layer 3 Switching Works 13-2
Layer 3 Switching Overview 13-2
Understanding Layer 3-Switched Packet Rewrite 13-2
Understanding CEF for PFC2/PFC3A 13-5
Understanding the NetFlow Statistics 13-11
Default CEF for PFC2/PFC3A Configuration 13-12
CEF for PFC2/PFC3A Configuration Guidelines and Restrictions 13-13
Configuring CEF for PFC2/PFC3A on the Switch 13-14
Displaying the Layer 3-Switching Entries on the Supervisor Engine 13-15
Configuring CEF on MSFC2/MSFC3 13-16
Specifying CEF Maximum Routes 13-16
Configuring IP Multicast on MSFC2/MSFC3 13-18
Displaying IP Multicast Information 13-20
Configuring the NetFlow Statistics on the Switch 13-27
Specifying NetFlow Table Entry Creation on a Per-Interface Basis 13-28
Specifying the NetFlow Table Entry Aging-Time Value 13-29
Specifying the NetFlow Table IP Entry Fast Aging Time and Packet Threshold Values 13-30
Setting the Minimum Statistics Flow Mask 13-31
Excluding the IP Protocol Entries from the NetFlow Table 13-31
Displaying the NetFlow Statistics 13-31
Clearing the NetFlow IP and IPX Statistics 13-34
Displaying the NetFlow Statistics Debug Information 13-36
Configuring the MLS IP-Directed Broadcasts on the Switch 13-36