Contents
xiii
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
OL-8978-04
Dynamic ARP Inspection 15-39
Configuring ACLs on Private VLANs 15-43
Capturing Traffic Flows 15-43
Unsupported Features 15-44
Configuring VACLs 15-44
VACL Configuration Guidelines 15-45
VACL Configuration Summary 15-46
Configuring VACLs from the CLI 15-46
Configuring MAC-Based ACL Lookups for All Packet Types 15-61
Overview of MAC-Based ACLs 15-61
Using MAC-Based ACL Lookups for All Packet Types 15-62
Including the VLAN and CoS in MAC-Based ACLs 15-62
Configuration Guidelines 15-63
Configuring MAC-Based ACL Lookups for All Packet Types 15-63
Configuring and Storing VACLs and QoS ACLs in Flash Memory 15-64
Automatically Moving the VACL and QoS ACL Configuration to Flash Memory 15-65
Manually Moving the VACL and QoS ACL Configuration to Flash Memory 15-65
Running with the VACL and QoS ACL Configuration in Flash Memory 15-67
Moving the VACL and QoS ACL Configuration Back to NVRAM 15-67
Redundancy Synchronization Support 15-67
Interacting with High Availability 15-68
Configuring Port-Based ACLs 15-68
PACL Configuration Overview 15-68
PACL Configuration Guidelines 15-69
Configuring PACLs from the CLI 15-72
PACL Configuration Examples 15-76
Configuring ACL Statistics 15-81
ACL Statistics Overview 15-81
Configuring ACL Statistics from the CLI 15-82
Configuring the Compression and Reordering of ACL Masks 15-87
Configuring the CRAM Feature from the CLI 15-87
Configuring Policy-Based Forwarding 15-90
Understanding How PBF Works 15-91
PBF Hardware and Software Requirements 15-91
Configuring PBF from the CLI 15-92
PBF Configuration Example 15-100
Enhancements to PBF Configuration (Software Releases 7.5(1) and Later) 15-102
Enhancements to the PBF Configuration (Software Releases 8.3(1) and Later) 15-105
Enhancements to PBF Configuration (Software Releases 8.6(1) and Later) 15-110
To Next Page
Loading...
