Cisco WS-C6506 - Page 17

Contents
xvii
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
OL-8978-04
Using IP Traceroute 20-18
Understanding How IP Traceroute Works 20-18
Executing IP Traceroute 20-19
Using System Warnings on Port Counters 20-19
Executing System Warnings on Port Counters 20-20
Executing Hardware Level Warnings on Port Counters 20-23
Executing Spanning-Tree Warnings on Port Counters 20-23
Configuring Packet-Buffer Error Handling 20-24
Configuring EtherChannel/Link Error Handling 20-24
Configuring IEEE 802.3ah Ethernet OAM 20-26
Understanding How OAM Works 20-26
Ethernet OAM Configuration Guidelines and Restrictions 20-27
Executing Ethernet OAM 20-27
Configuring Metro Ethernet Connectivity Fault Management 20-38
Understanding How Metro Ethernet Connectivity Fault Management Works 20-39
Connectivity Fault Management Protocols 20-39
Maintenance Domains 20-39
Maintenance Associations 20-40
Maintenance Points 20-40
CFM Configuration Guidelines and Restrictions 20-42
Configuring Metro Ethernet CFM 20-44
Configuring the Alarm Indication Signal 20-54
Understanding How CFM Works with 802.3ah Link-OAM for AIS-RDI 20-55
Ethernet Alarm Indication Signal 20-55
Ethernet Remote Defect Indication 20-56
ASI and RDI Configuration Guidelines and Restrictions 20-56
Configuring an Alarm Indication Signal 20-57
Configuring the Ethernet Local Management Interface 20-60
Understanding How ELMI Works 20-60
Ethernet Local Management Protocols 20-60
Configuring ELMI 20-61
Configuring ELMI on the Switch 20-62
Configuring MAC Address Move Counters 20-69
Understanding How MAC Address Move Counters Work 20-69
MAC Address Move Counter Configuration Guidelines and Restrictions 20-70
MAC Address Move Counter syslog Generation 20-70
Executing MAC Address Move Counters 20-71
Enabling or Disabling MAC Address Move Counters 20-71
Digital Optical Monitoring 20-73