Contents
xxxiv
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
OL-8978-04
Enabling IGMP Version 3 Fast-Block Processing 51-15
Enabling IGMP Rate Limiting 51-15
Enabling the IGMP Querier 51-16
Displaying Multicast Router Information 51-17
Displaying Multicast Group Information 51-18
Displaying IGMP Snooping Statistics 51-18
Disabling IGMP Fast-Leave Processing 51-19
Disabling IGMP Snooping 51-19
Configuring GMRP on the Switch 51-20
GMRP Software Requirements 51-20
Default GMRP Configuration 51-20
Enabling GMRP Globally 51-21
Enabling GMRP on Individual Switch Ports 51-21
Disabling GMRP on Individual Switch Ports 51-22
Enabling the GMRP Forward-All Option on a Switch Port 51-22
Disabling the GMRP Forward-All Option on a Switch Port 51-23
Configuring GMRP Registration 51-23
Setting the GARP Timers 51-25
Displaying GMRP Statistics 51-26
Clearing GMRP Statistics 51-26
Disabling GMRP Globally on the Switch 51-27
Configuring Multicast Router Ports and Group Entries on the Switch 51-27
Specifying Multicast Router Ports 51-27
Configuring Multicast Groups 51-28
Clearing Multicast Router Ports 51-29
Clearing Multicast Group Entries 51-29
Understanding How RGMP Works 51-29
Configuring RGMP on the Switch 51-31
Configuring RGMP on the Supervisor Engine 51-31
Configuring RGMP on the MSFC 51-35
Displaying the Multicast Protocol Status 51-35
Understanding How Bidirectional PIM Works 51-35
Configuring Bidirectional PIM on the Switch 51-36
Configuring Bidirectional PIM 51-36
Enabling or Disabling Bidirectional PIM Globally 51-36
Configuring the Rendezvous Point for Bidirectional Groups 51-37
Setting the Bidirectional PIM Scan Interval 51-37
Displaying Bidirectional PIM Information 51-38
To Next Page
Loading...
