Cisco WS-C6506

Contents
xxxiii
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
OL-8978-04
Configuring RSPAN on the Switch 49-10
RSPAN Hardware Requirements 49-10
Understanding How RSPAN Works 49-10
RSPAN Configuration Guidelines 49-11
Configuring RSPAN 49-12
RSPAN Configuration Examples 49-15
Configuring the Mini Protocol Analyzer on the Switch 49-19
Mini Protocol Analyzer Hardware Requirements 49-19
Understanding How the Mini Protocol Analyzer Works 49-19
Mini Protocol Analyzer Configuration Guidelines 49-20
Configuring the Mini Protocol Analyzer from the CLI 49-21
CHAPTER 50 Using Switch TopN Reports 50-1
Understanding How the Switch TopN Reports Utility Works 50-1
TopN Reports Overview 50-1
Running Switch TopN Reports without the Background Keyword 50-2
Running Switch TopN Reports with the Background Keyword 50-2
Running and Viewing Switch TopN Reports 50-3
CHAPTER 51 Configuring Multicast Services 51-1
Understanding How Multicasting Works 51-1
Multicasting and Multicast Services Overview 51-2
Understanding How IGMP Snooping Works 51-2
Understanding How GMRP Works 51-6
Understanding How RGMP Works 51-6
Suppressing Multicast Traffic 51-7
Rate-Limiting RPF Failure Traffic 51-7
Enabling the Installation of Directly Connected Subnets 51-8
Understanding IGMP Querier 51-8
Redundancy for Multicast Traffic 51-9
Configuring IGMP Snooping on the Switch 51-10
Default IGMP Snooping Configuration 51-10
IGMP Snooping Configuration Guidelines 51-11
Enabling IGMP Snooping 51-11
Enabling IGMP Flooding 51-12
Specifying the IGMP Snooping Mode 51-12
Specifying the IGMP Leave-Query Type 51-13
Enabling IGMP Fast-Leave Processing 51-13
Enabling IGMP Version 3 Snooping 51-14