14-39
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
OL-8978-04
Chapter 14 Configuring MLS
Configuring MLS
Router IP Router Name Router MAC
-------------------------------------------------------
1.1.5.252 ? 00-10-29-8d-88-01
Transmit:
Delete Notifications: 22
Acknowledgements: 75
Flow Statistics: 22
Receive:
Open Connection Requests: 1
Keep Alive Messages: 68
Shortcut Messages: 6
Shortcut Install TLV: 4
Selective Delete TLV: 2
Group Delete TLV: 0
Update TLV: 0
Input VLAN Delete TLV: 0
Output VLAN Delete TLV: 0
Global Delete TLV: 0
MFD Install TLV: 4
MFD Delete TLV: 0
Console (enable)
Clearing IP MMLS Statistics
The clear mls multicast statistics command clears the IP MMLS statistics for all the participating
MSFCs.
To clear the IP MMLS statistics, perform this task in privileged mode:
This example shows how to clear the IP MMLS statistics:
Console> (enable) clear mls multicast statistics
All statistics for the MLS routers in include list are cleared.
Console> (enable)
Displaying IP MMLS Entries
The show mls multicast entry command displays information about the multicast flows that are handled
by the PFC. You can display the entries that are based on any combination of the participating MSFC,
the VLAN, the multicast group address, or the multicast traffic source.
To display information about the IP MMLS entries, perform this task in privileged mode:
Task Command
Clear the IP MMLS statistics. clear mls multicast statistics
Task Command
Display information about the IP MMLS
entries.
show mls multicast entry [[[mod] [vlan vlan_id]
[group ip_addr] [source ip_addr]] | [all]]
To Next Page
Loading...
Need help?
General