InteliDrive Lite, SW version 1.9
ID-FLX-Lite-1.9r1 Reference Guide.pdf, ©ComAp – August 2015
Practical examples of values read from ECU:
If Cummins-Modbus x.x option is selected, following values are read from Modbus Register Data (for
QSX15, QSK45, QSK60):
11.6 ECU Analog inputs
Reading of mentioned values from ECU enables to use analog inputs of the unit for other purposes,
e.g. measuring, displaying and alarm activation related to various quantities. The configuration thus
allows using nine analog inputs on the central unit and four analog inputs on plug-in module if
connected.
If the engine without ECU is controlled by InteliDrive Lite, the first analog input is permanently
configured to Oil Pressure, other analog inputs remain freely configurable.
11.7 Tier 4 engines support
When the configured ECU supports Tier4 standard, on the controller appears a supplementary screen
where are displayed the values relative to the Tier4.
To Next Page
Loading...
