ComAp InteliDrive Lite - IL-NT RS232-485 (Optional Card); IL-NT S-USB (Optional Card); IB-Lite (Optional Card); IL-NT GPRS (Optional Card)

InteliDrive Lite, SW version 1.9
ID-FLX-Lite-1.9r1 Reference Guide.pdf, ©ComAp – August 2015
146
14.11 IL-NT RS232-485 (optional card)
Plug-in into InteliDrive Lite controller COMMUNICATION MODULE port.
Maximal distance 10m (RS232), 1200m (RS485)
Maximum Speed Up to 57.6 kBd (DIRECT), 38.4kBd Analog modem,
9.6 kBd digital modem, 57.6 kBd (MODBUS)
14.12 IL-NT S-USB (optional card)
Plug-in into InteliDrive Lite controller COMMUNICATION MODULE port.
Maximal distance 5m
Maximum Speed Up to 57.6 kBd (DIRECT), 38.4kBd Analog modem,
9.6 kBd digital modem, 57.6 kBd (MODBUS)
Use only shielded A-B USB cables up to 5m length.
Recommend USB cable:
USB-LINK CABLE 1.8M - ComAp A-B USB cable.
14.13 IB-Lite (optional card)
Plug-in into InteliDrive Lite controller COMMUNICATION MODULE port.
10/100 MBit ethernet interface in RJ45 socket.
14.14 IL-NT GPRS (optional card)
Plug-in into InteliDrive Lite controller COMMUNICATION MODULE port.
GSM/GPRS modem
Quad Band 850/900/1800/1900MHz
GPRS multi-slot class 10
CSD communication up to 14.4kbps
TCP/IP communication over GPRS
Voltage supply 8-36VDC
14.15 IL-NT AOUT8 (optional card)
Plug-in into InteliDrive Lite controller EXTENSION MODULE port.
Number of PWM outputs 8
PWM frequency 1200Hz
Maximum current 0,5A
Maximum switching voltage 36VDC
Output resistance 1Ohm
Resolution 10bits