ComAp InteliDrive Lite - Batt Overvolt [V]; Batt Undervolt [V]; Batt Volt del [S]; AIN4 Level 1 [ ]

InteliDrive Lite, SW version 1.9
ID-FLX-Lite-1.9r1 Reference Guide.pdf, ©ComAp – August 2015
96
Analog input 3 is usually determined to Fuel Level measurement and it is resistive type of input with
range 0-2500Ohm.
7.7.18 Batt overvolt [V]
High battery voltage Warning limit
Step: 0.1V
Range: Batt undervolt - 40.0V
Default: 36.0V
7.7.19 Batt undervolt [V]
Low battery voltage Warning limit.
Step: 0.1V
Range: 8.0 - Batt overvolt
Default: 18.0V
7.7.20 Batt volt del [s]
Delay for low and high battery voltage alarm.
Step: 1s
Range: 0 - 600s
Default: 5s
7.7.21 AIN4 Level 1 [ ]
Warning limit level for AIN4
Step: 1
Range: 0 - 10000
Default: 20
7.7.22 AIN4 Level 2 [ ]
Shutdown limit level for AIN4
Step: 1
Range: 0 - 10000
Default: 10
7.7.23 AIN4 Del [s]
Delay for Wrn/Sd AIN4 alarm.
Step: 1s
Range: 0 - 3600s
Default: 10s