ComAp InteliDrive Lite Reference Guide

InteliDrive Lite, SW version 1.9
ID-FLX-Lite-1.9r1 Reference Guide.pdf, ©ComAp – August 2015
125
10.2.25 V batt failed
Output closes when battery over/under voltage warning appears.
The output opens, if
 alarm is not active and
 FAULT RESET is pressed
10.2.26 Common Wrn
Output closes when any warning alarm appears.
The output opens, if
 No warning alarm is active and
 FAULT RESET is pressed
10.2.27 Common Sd
Output closes when any shutdown alarm appears.
The output opens, if
 No Sd alarm is active and
 FAULT RESET is pressed
10.2.28 Common Cd
Output closes when any cooldown alarm appears.
The output opens, if
 No Cd alarm is active and
 FAULT RESET is pressed
10.2.29 Common Fls
Output closes when any sensor fail alarm appears.
The output opens, if
 No warning alarm is active and
 FAULT RESET is pressed
10.2.30 Sd Oil Press
Output closes if the oil pressure shutdown alarm activates.
The output opens, if
 alarm is not active and
 FAULT RESET is pressed
10.2.31 Wrn Oil Press
Output closes if the oil pressure warning alarm activates.
The output opens, if

ComAp InteliDrive Lite Specifications

General

Brand	ComAp
Model	InteliDrive Lite
Category	Controller
Language	English